1. Home
  2. Mobile Internet & Data
  3. Antennas
  4. 5-in1 Cellular, WIFI & GPS Roof Antenna - Poynting MIMO-3-15 | 2×2 LTE + 2×2 WiFi + GPS

5-in1 Cellular, WIFI & GPS Roof Antenna - Poynting MIMO-3-15 | 2×2 LTE + 2×2 WiFi + GPS

1 Review(s) Write a Review
Your Price: $195.95
Part Number: A-MIMO-0003-V2-15
Availability: In Stock - Same Day Shipping if Ordered By 3:00PM EST

Choose Options


5-in-1 Antenna
2x WiFi + 2x LTE + GPS

2x Cellular MIMO-3-V2-15

The MIMO-3-V2-15 is a great addition to your cellular mobile router including our Pepwave line of products. This antenna will provide 2x MIMO 4G cellular antennas and 2x 2.4G/5G wifi and GPS to the roof of your RV. The antenna includes an 82.5'' or 6.8ft cable with the appropriate fittings to fit Cradllepoint, Peplink/Pepwave and other devices. Shorter cables mean less cable loss and better cable reception. Cable extensions are available below. 




**NOTE: If you are adding a cellular booster such as a Weboost then adding a roof antenna to your Pepwave will mean that your Pepwave will not take advantage of your booster. Either add a MIMO cellular antenna or a booster to your setup, both are not generally recommended. Both options have pros/cons so we recommend you send us a chat request if you are unsure of which is best for you**


The MIMO-3-V2-15 consists of a 5-in-1 antenna system within a single housing, providing 2x Cellular, 2x Wi-Fi and a GPS/GLONASS. This antenna is specifically designed for the transportation and marine industry. The 2x Cellular MIMO antennas cover the contemporary 690MHz to 2700MHz bands, as well as the new emerging LTE and 5G spectrum for 450MHz and 3.5GHz CBRS bands, which are becoming popular for LTE. This antenna, due to its wide band capabilities, can be used across different operators and technologies and is ready for future cellular technologies such as 5G up to 3.8GHz.

The antenna provides two separate dual-band Wi-Fi antennas, providing concurrent 2.4GHz and 5GHz on each antenna with 2×2 MIMO capability.

The fifth antenna is a high-performance active GPS/GLONASS system operating down to -40 degrees. The radiation patterns of all elements provide an excellent balance between omnidirectIonality, pattern diversity, and radiation abilities. The MIMO-3-15 main applications are commercial and industrial vehicles, marine, M2M and other IoT systems using a wide range of radio technologies.

GSM/3G/LTE electrical specifications
Frequency Bands:
410-470 MHz
690-960 MHz
1710-2700 MHz
3400-3800 MHz

LTE Max Gain: 5.8 dBi
LTE VSWR: <2.5:1
Feed Power Handling: 10 W
Input impedance: 50 Ohm (nominal)
Polarization: Linear Vertical x 2
Cable loss:
0.35 dB/m @ 900 MHz
0.53 dB/m @ 2000 MHz
0.6 dB/m @ 2500 MHz
0.72 dB/m @ 3500 MHz

GPS/Glonas Antenna electrical specifications
Frequency Range (GPS): 1575.42MHz/1600MHz
Gain (Max): 21+/-2dBi
VSWR: =1.5:1
DC Voltage: 2.7-3.3 V
DC Current: 5-15mA
Noise Figure: =1.5 dB
Nominal Impedance: 50 O
Polarization: RHCP
Filter Out Band Attenuation:
12dB Min f0+50MHz,
16dBi Min f0-50MHz
Cable: 0.04m Micro Cable 1.13
Connector: SMA (M)
Voltage: 2.7 – 3.3V
Max. Power-W: 50W

Wi-Fi electrical specifications
Frequency: 2400-2500 MHz
5000-6000 MHz
Gain (Max): 7 dBi
VSWR: < 2.5:1 over 95% of the band
Feed power handling: 10 W
Nominal input impedance: 50 Ohms
Polarization: 2 x Vertical linear

Environmental Specifications
Wind Survival: 136 mph
Temperature Range (Operating): -40°F to +175°F
Environmental Conditions: Outdoor/Indoor
Water/particle ingress: IP68
Salt Spray: MIL-STD 810F/ASTM B117
Operating Relative Humidity: Up to 98%
Storage Humidity: 5% to 95% – non-condensing

Mechanical Specifications
Product Dimensions (L x W x D): 10? x 5? x 5.7?
Weight: 3 lbs
Radome Material: UV Stable SAN Marine ASA
Radome Color: Brilliant White
Cable Length: 82.5 Inches
Cable Type: RTK-031
Connector: 5 x SMA male
The connectors are factory mounted to the antenna

Reward Points

196 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items